Ramsey Electronics TF-1 Manuál s instrukcemi stáhnout pdf (Strana 17)

TF1 • 17

enameled wire with solder for easy connections later.

Well you’ve almost made it to the completion of your treasure finder. Just a

few more steps and you will be beachcombing!

❒ 7. Now we’ll attach the coaxial cable to the coil assembly. Affix the center

conductor of the coax to one end of the search coil. You may want to

insulate this connection with some electrical tape after you have verified

that it is a good solder connection.

❒ 8. The final connection to the coil assembly will connect the remaining

end of the coil, the braid of the coaxial cable, and the copper tubing (to

complete the “Faraday shield “ for the search coil. Again be careful not to

overheat the ground shield of the cable, as the center conductor

Attach one end of wire to

braid of coax and copper tubing

Attach one end of coil to

center conductor of coax

LOOP SHIELD

IEWED FROM ABOV

FLATTEN ENDS OF

SEARCH COIL TUBING

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23

Žádné komentáře

Ramsey Electronics TF-1 Manuál s instrukcemi Strana 17